pinterest icon
Start a Project
November 21, 2021

Apartment Space Planning in Zürich: From Room Programme to Layout

How to plan an apartment in Zürich: build a room programme, measure, zone, test circulation and place furniture, with Swiss reference figures.

Good apartment space planning starts with people, not furniture. You write down who lives in the home and what they do there. You turn that into a room programme, a list of rooms and areas. Only then do you measure, draw zones, trace walking routes and place furniture at real size. If you skip the first two steps, you end up with a sofa that fits but a flat that doesn't work. We design apartments in Zürich every week, and this is the order that gives you a plan you can trust, whether you do the first draft yourself or hand the whole thing to us.

Upscale Interiors

Plan a Home That Works for You

Upscale Interiors offers space planning and 3D visualizations to help shape residential spaces around your needs and daily routines.

Visit

TL;DR

  • Start with needs and daily routines, then a room programme, and only then furniture and floor areas.
  • Swiss reference figures help you sanity-check the programme: for example 40 m² for one person, 50 m² for two and 70 m² for four, as housing-promotion minimums.
  • Measure everything fixed (doors, windows, radiators, sockets, ceiling height) before you place a single piece.
  • Keep walking routes free, zone open rooms by activity, and test the layout with tape on the floor for a few days.
  • If you want the plan drawn, visualised in 3D and sourced, a Single Area or Full Home package covers it from CHF 970.

Why the room programme comes before the floor plan

A room programme is simply a written list of what your home has to do: which rooms, for whom, with which activities and roughly how much space each. Architecture teaching follows a clear sequence here. It begins with needs in the residents' own words, turns them into activities, then into spaces, and only then attaches areas. Starting with a list of rooms and square metres skips the two steps where the real thinking happens.

Needs become activities, spaces, and area allowances

For a home that sounds like extra work. In practice it saves you money. Once you know that one person works from home three days a week and another practises the cello, you know the second bedroom is not a guest room at all. You also know where the budget should go.

Step 1: Work out what your home has to support

Grab a sheet of paper and answer three questions for each person in the household: what do you do at home on a normal weekday, what do you do at the weekend, and what will change in the next ten years? Children growing up, a parent moving in, a hybrid work pattern: all of it belongs in the plan.

It helps to know how people in Switzerland rank their rooms. A study by the Federal Office of Housing (BWO), Wohnraumnutzung aus individueller Sicht, sorts rooms into three groups:

  1. Basic needs: living room, dining room or kitchen, bedroom. These are the rooms nearly everyone treats as essential.
  2. Comfort rooms: an office, a guest room, a children's room.
  3. Luxury rooms: a dressing room or a playroom, named by fewer than 15% of respondents.

The same study finds that the home office moves into the basic-needs group as the amount of spare space grows. That matches what we hear from clients: once a flat is big enough, a dedicated work corner stops feeling like a luxury.

For each room, note the following:

  • the main use and any secondary uses (a living room is often also a reading spot, a play area and a place where laundry gets folded);
  • how many people use it at the same time;
  • what each activity needs: a surface, a seat, a socket, daylight, quiet, privacy;
  • which activities get in each other's way.

If you're unsure about your own routines, keep a short log for a week. The bike that always leans by the front door or the ironing board that lives in the lounge will show up and change your plan.

Step 2: Turn the needs into a room programme

Now convert the notes into a table. Keep it simple: one line per room or zone, with its function, users, storage need and a target area. A first version for a two-person apartment might look like this:

Room or zone Main use Secondary use Storage Priority
Living area Sitting, talking, TV Reading, guests Sideboard, shelving Essential
Kitchen and dining Cooking, eating for 4 Working at the table Pantry, appliances Essential
Bedroom Sleeping Dressing Wardrobe, bedside storage Essential
Home office Focused work, calls Occasional guest bed Files, equipment Important
Entrance Arriving, leaving Coats, shoes, post Built-in cupboard Important
Reading corner Reading Music Books Optional

The priority column does a lot of work. Sorting everything into essential, important and optional tells you what survives if the space or the budget turns out tighter than you hoped.

A reality check with Swiss reference figures

The federal ordinance on housing promotion, SR 843.142.3, sets minimum net living areas by household size. It's a subsidy-related reference, not a rule for your private flat, but it's a handy yardstick:

Household Minimum total area
1 person 40 m²
2 people 50 m²
3 people 60 m²
4 people 70 m²

For a single person, the ordinance breaks the 40 m² down into 26 m² of individual area, 5 m² of kitchen, 4 m² of hygiene area and 5 m² of remaining space. Kitchens range from 5 to 6.5 m² and hygiene areas from 4 to 5.5 m² depending on household size. If your programme asks for far more than these figures, you're planning generously. If it asks for far less, expect some rooms to do double duty.

For bedrooms, Swiss accessibility guidance based on SIA 500 gives a useful picture. A bedroom needs at least 14 m² with a width of at least 3.0 m, and a 3.00 m by 4.00 m rectangle is recommended. That allows a double bed with 1.40 m of manoeuvring space on one side and 0.80 m on the other side and at the foot. Under sloping ceilings, areas lower than 1.50 m don't count towards the 14 m². If you plan a top-floor apartment, remember that rule before you promise yourself a walk-in wardrobe under the eaves.

Step 3: Record what is already there

A layout only works if it respects the fixed points. Walk through the apartment with a tape measure, a notebook and your phone camera, and record:

  • the outline of every room and the ceiling height;
  • doors, including the direction they swing, and windows with their sill height;
  • radiators, ventilation openings, sockets, switches, TV and internet connections;
  • water and drain points in the kitchen and bathrooms;
  • recesses, projections, sloping ceilings and built-in cupboards;
  • access to balconies, terraces or neighbouring rooms.

One Swiss moving guide suggests transferring the measurements to a scale drawing at 1:20 and keeping at least 75 cm between pieces of furniture. Make two or three copies of the plan so you can try different arrangements on paper.

Measure twice, and write the numbers on the plan itself. The classic mistakes are measuring wall to wall and forgetting the skirting boards, or forgetting that a radiator niche steals 15 cm exactly where the sideboard was meant to go.

Radiator niche and skirting board in a Zürich hallway

If the building is old or you're planning to move walls or services, you'll need technical drawings and a professional's eye on the structure. We prepare technical drawings as part of our design projects, so the measured survey flows straight into the plan.

Step 4: Zone the rooms and trace the walking routes

With the programme and the fixed points on one page, you can start placing zones. Don't think of furniture yet. Think of activity areas: cooking, eating, sitting, working, sleeping, storing.

For every zone, ask four questions:

  1. What does it need to be near (a window, a socket, the kitchen)?
  2. What does it need to be away from (a door swing, the main path, the TV, a heater)?
  3. Which zones belong together (dining next to the kitchen, a reading chair near the conversation area)?
  4. Which zone is the main one and gets the best spot?

These are the adjacency questions a planning guide uses to place zones in a room. In most living spaces, the main zone is the one that gets the best daylight and view, so the sofa group or the dining table usually claims the window first.

Open-plan living: define zones without new walls

In an open living-dining-kitchen space, a Swiss media guide makes the key point: zoning begins with clarifying which activities actually happen, not with buying a room divider. Mark doors, windows, terrace access and the paths people use every day. The aim isn't wide empty corridors. It's movement routes that lead naturally through the zones without cutting across the seating or work areas.

Once the order is clear, each element can do one job: the sofa defines the living zone, a rug ties it together, a floor lamp gives it its own light, a pendant anchors the dining table and a shelf separates a workspace. If you'd like more ideas, see our guide to room divider hacks that need no renovation.

Circulation: the part nobody sees until it's wrong

Trace the routes from the front door to the living area, from the kitchen to the table, from the bedroom to the bathroom. Then check these points:

  • Main routes should feel comfortable, and secondary passages between furniture should be at least the 75 cm mentioned above, more where two people pass each other.
  • Every door needs space to swing. If a door opens into a sofa, the sofa moves, not the door.
  • A route that cuts through the seating group makes the sofa a corridor. Shift the zone or the furniture.
  • Accessibility matters even if nobody in your home needs it today: doors and short openings need a clear width of at least 0.80 m under the same Swiss guidance.

Step 5: Place furniture at real size and test it in life

Only now do you put furniture on the plan, and at its real size, including the space a chair needs when you pull it back, the room a drawer needs to open and the room you need to walk past. A good drawing method is to imagine yourself sitting, reaching, opening, storing, cleaning and passing another person in each room.

Then make it physical. Mark the outlines of the sofa, bed or dining table on the floor with masking tape or sheets of paper. A few days of everyday life often show more than a floor plan, and after that time you can tell whether the routes stay free, whether the workspace is quiet enough and whether daylight still reaches the area behind the furniture.

Finally, check the plan against the programme, line by line:

  • Does each priority-one function have its space?
  • Is there storage close to where things are used?
  • Does each zone have the light it needs, both daylight and artificial?
  • Can the layout cope with the changes you noted in step 1?

If the answer to any of these is no, you've found a problem on paper, which is far cheaper than finding it after delivery day.

Where a designer changes the result

You can take this process a long way on your own. A designer shortens it and adds things a tape measure can't. Three examples:

  • Trade-offs under one roof. A designer weighs the programme, the budget and the look together, so the plan doesn't end up beautiful but unusable, or practical but flat.
  • 3D visualisation. Seeing the finished room before anything is ordered makes decisions easier, particularly for couples who imagine different things.
  • Sourcing and delivery. Once the plan is final, someone has to find the pieces that fit its dimensions. Our network covers more than 185 furniture brands, and we handle delivery and installation.

If you're planning a bedroom specifically, our guide on how to design a master bedroom suite in Zürich walks through that room in detail, and the project timeline shows how the planning phase fits into a full project.

Perspective

Most people start with the sofa. We start with the Tuesday evening.

When a new client in Zürich shows us a floor plan, the first thing we ask is what happens in that home on an ordinary day: who cooks, who works, who needs quiet, who comes to visit. The room programme grows out of those answers, and the layout follows. That order is what turns a nice apartment into one that feels effortless to live in.

Our background in both architecture and interior design matters here. We read a plan as a building professional would, looking at the structure, the services and the openings, and then we make it feel like a home. With more than 480 completed projects behind us, we know how much a well-drawn plan saves later, in money, in nerves and in returns.

So if you take one thing from this article, let it be this: write the programme first, and let the plan serve it. Everything else, the materials, the brands, the finishing touches, becomes the fun part.

Giorgia D'Amico

Getting the plan done with us

If you'd like a professional plan without managing every step, our online packages are built for exactly this. The Consultation costs CHF 490 as a one-off, and it's a good start if you want an expert view on your layout and programme. The Single Area Package at CHF 970 covers one room or zone, and the Full Home Package at CHF 3,390 covers your whole home. Both are one-off prices. For larger or more complex projects, you can request an individual offer. Take a look at our interior design packages or go straight to the Full Home Online Package. We work with clients online and in person across Switzerland.

FAQ

What is a room programme, and why do I need one?

A room programme is a written list of the rooms and zones your home needs, with their uses, users, storage and approximate areas. It makes sure the layout is built around how you live rather than around the furniture you already own. It also gives you a clear priority list when budget or space gets tight.

How big should each room be?

There's no single right answer, but Swiss figures give you a frame. The federal ordinance on housing promotion sets minimum areas from 40 m² for one person to 70 m² for four, and accessibility guidance suggests at least 14 m² for a bedroom. Use these as a reality check, then adapt to your own routines.

What should I measure before planning an apartment?

Measure each room's outline and ceiling height, plus doors with their swing direction, windows with sill heights, radiators, sockets, switches and water points. Add recesses, built-in cupboards, sloping ceilings and balcony access. Draw it all to scale, ideally at 1:20, so you can test arrangements on paper.

How do I zone an open living space without building walls?

First decide which activities take place there, then place furniture, rugs and lighting so each zone has a clear job. Keep the main walking routes free so they don't cut through seating or work areas. Test the arrangement for a few days with tape or paper on the floor before you commit.

Do I need a designer, or can I plan it myself?

You can draft a plan yourself with this process. A designer adds technical drawings, 3D visualisation and furniture sourcing, and keeps the whole project consistent. If you'd like to start small, a consultation gets you an expert view on your layout.

Sources

Recommended

‍

November 21, 2021
Share article
Disclaimer
We do not own the rights to some of the images. We do try to provide the original source, however, this is not always possible. Should you wish to have an image removed or you would like to make a  correction, please contact us at hello@upscale.ch.
The image is completely black, indicating an absence of visible content or possibly a loading error.

Get started!

Have a project in mind? Fill out our form and we will contact you!

Start a ProjectCurved broken arrow pointing to the right.

Let’s have a cup of coffee and talk about your project!

Curious to know more about Upscale?  Send us a brief message and we'll get back to you right away.
* We don't share your data. See our Policy
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Tell Us About Your Project | Upscale Interiors
Book a call